mirror of
https://github.com/lkl/linux.git
synced 2025-12-19 08:03:01 +09:00
9229a9483d
Marvell MV88E6361 is an 8-port switch derived from the 88E6393X/88E9193X/88E6191X switches family. Since its functional behavior is very close to switches from this family, it can benefit from existing drivers for this family, so add it to the list of compatible switches Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
110 lines
3.2 KiB
Plaintext
110 lines
3.2 KiB
Plaintext
Marvell DSA Switch Device Tree Bindings
|
|
---------------------------------------
|
|
|
|
WARNING: This binding is currently unstable. Do not program it into a
|
|
FLASH never to be changed again. Once this binding is stable, this
|
|
warning will be removed.
|
|
|
|
If you need a stable binding, use the old dsa.txt binding.
|
|
|
|
Marvell Switches are MDIO devices. The following properties should be
|
|
placed as a child node of an mdio device.
|
|
|
|
The properties described here are those specific to Marvell devices.
|
|
Additional required and optional properties can be found in dsa.txt.
|
|
|
|
The compatibility string is used only to find an identification register,
|
|
which is at a different MDIO base address in different switch families.
|
|
- "marvell,mv88e6085" : Switch has base address 0x10. Use with models:
|
|
6085, 6095, 6097, 6123, 6131, 6141, 6161, 6165,
|
|
6171, 6172, 6175, 6176, 6185, 6240, 6320, 6321,
|
|
6341, 6350, 6351, 6352
|
|
- "marvell,mv88e6190" : Switch has base address 0x00. Use with models:
|
|
6163, 6190, 6190X, 6191, 6290, 6390, 6390X
|
|
- "marvell,mv88e6250" : Switch has base address 0x08 or 0x18. Use with model:
|
|
6220, 6250
|
|
|
|
Required properties:
|
|
- compatible : Should be one of "marvell,mv88e6085",
|
|
"marvell,mv88e6190" or "marvell,mv88e6250" as
|
|
indicated above
|
|
- reg : Address on the MII bus for the switch.
|
|
|
|
Optional properties:
|
|
|
|
- reset-gpios : Should be a gpio specifier for a reset line
|
|
- interrupts : Interrupt from the switch
|
|
- interrupt-controller : Indicates the switch is itself an interrupt
|
|
controller. This is used for the PHY interrupts.
|
|
#interrupt-cells = <2> : Controller uses two cells, number and flag
|
|
- eeprom-length : Set to the length of an EEPROM connected to the
|
|
switch. Must be set if the switch can not detect
|
|
the presence and/or size of a connected EEPROM,
|
|
otherwise optional.
|
|
- mdio : Container of PHY and devices on the switches MDIO
|
|
bus.
|
|
- mdio? : Container of PHYs and devices on the external MDIO
|
|
bus. The node must contains a compatible string of
|
|
"marvell,mv88e6xxx-mdio-external"
|
|
|
|
Example:
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
switch0: switch@0 {
|
|
compatible = "marvell,mv88e6085";
|
|
reg = <0>;
|
|
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
switch1phy0: switch1phy0@0 {
|
|
reg = <0>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
switch0: switch@0 {
|
|
compatible = "marvell,mv88e6190";
|
|
reg = <0>;
|
|
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
switch1phy0: switch1phy0@0 {
|
|
reg = <0>;
|
|
interrupt-parent = <&switch0>;
|
|
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
mdio1 {
|
|
compatible = "marvell,mv88e6xxx-mdio-external";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
switch1phy9: switch1phy0@9 {
|
|
reg = <9>;
|
|
};
|
|
};
|
|
};
|
|
};
|