Implicit vma locking inside vm_flags_reset() and vm_flags_reset_once() is
not obvious and makes it hard to understand where vma locking is happening.
Also in some cases (like in dup_userfaultfd()) vma should be locked earlier
than vma_flags modification. To make locking more visible, change these
functions to assert that the vma write lock is taken and explicitly lock
the vma beforehand. Fix userfaultfd functions which should lock the vma
earlier.
Link: https://lkml.kernel.org/r/20230804152724.3090321-5-surenb@google.com
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unfortunately commit 474098edac ("mm/gup: replace FOLL_NUMA by
gup_can_follow_protnone()") missed that follow_page() and
follow_trans_huge_pmd() never implicitly set FOLL_NUMA because they really
don't want to fail on PROT_NONE-mapped pages -- either due to NUMA hinting
or due to inaccessible (PROT_NONE) VMAs.
As spelled out in commit 0b9d705297 ("mm: numa: Support NUMA hinting
page faults from gup/gup_fast"): "Other follow_page callers like KSM
should not use FOLL_NUMA, or they would fail to get the pages if they use
follow_page instead of get_user_pages."
liubo reported [1] that smaps_rollup results are imprecise, because they
miss accounting of pages that are mapped PROT_NONE. Further, it's easy to
reproduce that KSM no longer works on inaccessible VMAs on x86-64, because
pte_protnone()/pmd_protnone() also indictaes "true" in inaccessible VMAs,
and follow_page() refuses to return such pages right now.
As KVM really depends on these NUMA hinting faults, removing the
pte_protnone()/pmd_protnone() handling in GUP code completely is not
really an option.
To fix the issues at hand, let's revive FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
to restore the original behavior for now and add better comments.
Set FOLL_HONOR_NUMA_FAULT independent of FOLL_FORCE in
is_valid_gup_args(), to add that flag for all external GUP users.
Note that there are three GUP-internal __get_user_pages() users that don't
end up calling is_valid_gup_args() and consequently won't get
FOLL_HONOR_NUMA_FAULT set.
1) get_dump_page(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE and wouldn't have honored NUMA
hinting faults already.
2) populate_vma_page_range(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE on accessible VMAs, so it wouldn't have
honored NUMA hinting faults already.
3) faultin_vma_page_range(): we similarly don't want to handle NUMA
hinting faults.
To make the combination of FOLL_FORCE and FOLL_HONOR_NUMA_FAULT work in
inaccessible VMAs properly, we have to perform VMA accessibility checks in
gup_can_follow_protnone().
As GUP-fast should reject such pages either way in
pte_access_permitted()/pmd_access_permitted() -- for example on x86-64 and
arm64 that both implement pte_protnone() -- let's just always fallback to
ordinary GUP when stumbling over pte_protnone()/pmd_protnone().
As Linus notes [2], honoring NUMA faults might only make sense for
selected GUP users.
So we should really see if we can instead let relevant GUP callers specify
it manually, and not trigger NUMA hinting faults from GUP as default.
Prepare for that by making FOLL_HONOR_NUMA_FAULT an external GUP flag and
adding appropriate documenation.
While at it, remove a stale comment from follow_trans_huge_pmd(): That
comment for pmd_protnone() was added in commit 2b4847e730 ("mm: numa:
serialise parallel get_user_page against THP migration"), which noted:
THP does not unmap pages due to a lack of support for migration
entries at a PMD level. This allows races with get_user_pages
Nowadays, we do have PMD migration entries, so the comment no longer
applies. Let's drop it.
[1] https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
[2] https://lore.kernel.org/r/CAHk-=wgRiP_9X0rRdZKT8nhemZGNateMtb366t37d8-x7VRs=g@mail.gmail.com
Link: https://lkml.kernel.org/r/20230803143208.383663-2-david@redhat.com
Fixes: 474098edac ("mm/gup: replace FOLL_NUMA by gup_can_follow_protnone()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: liubo <liubo254@huawei.com>
Closes: https://lore.kernel.org/r/20230726073409.631838-1-liubo254@huawei.com
Reported-by: Peter Xu <peterx@redhat.com>
Closes: https://lore.kernel.org/all/ZMKJjDaqZ7FW0jfe@x1n/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Arm disabled hugetlb vmemmap optimization [1] because hugetlb vmemmap
optimization includes an update of both the permissions (writeable to
read-only) and the output address (pfn) of the vmemmap ptes. That is not
supported without unmapping of pte(marking it invalid) by some
architectures.
With DAX vmemmap optimization we don't require such pte updates and
architectures can enable DAX vmemmap optimization while having hugetlb
vmemmap optimization disabled. Hence split DAX optimization support into
a different config.
s390, loongarch and riscv don't have devdax support. So the DAX config is
not enabled for them. With this change, arm64 should be able to select
DAX optimization
[1] commit 060a2c92d1 ("arm64: mm: hugetlb: Disable HUGETLB_PAGE_OPTIMIZE_VMEMMAP")
Link: https://lkml.kernel.org/r/20230724190759.483013-8-aneesh.kumar@linux.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The majority of the calls to munmap a vm range is within a single vma.
The maple tree is able to store a single entry at 0, with a size of 1 as
a pointer and avoid any allocations. Change do_vmi_align_munmap() to
store the VMAs being munmap()'ed into a tree indexed by the count. This
will leverage the ability to store the first entry without a node
allocation.
Storing the entries into a tree by the count and not the vma start and
end means changing the functions which iterate over the entries. Update
unmap_vmas() and free_pgtables() to take a maple state and a tree end
address to support this functionality.
Passing through the same maple state to unmap_vmas() and free_pgtables()
means the state needs to be reset between calls. This happens in the
static unmap_region() and exit_mmap().
Link: https://lkml.kernel.org/r/20230724183157.3939892-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Despite its name, mm_drop_all_locks() does not drop _all_ locks; the mmap
lock is held write-locked by the caller, and the caller is responsible for
dropping the mmap lock at a later point (which will also release the VMA
locks).
Calling vma_end_write_all() here is dangerous because the caller might
have write-locked a VMA with the expectation that it will stay
write-locked until the mmap_lock is released, as usual.
This _almost_ becomes a problem in the following scenario:
An anonymous VMA A and an SGX VMA B are mapped adjacent to each other.
Userspace calls munmap() on a range starting at the start address of A and
ending in the middle of B.
Hypothetical call graph with additional notes in brackets:
do_vmi_align_munmap
[begin first for_each_vma_range loop]
vma_start_write [on VMA A]
vma_mark_detached [on VMA A]
__split_vma [on VMA B]
sgx_vma_open [== new->vm_ops->open]
sgx_encl_mm_add
__mmu_notifier_register [luckily THIS CAN'T ACTUALLY HAPPEN]
mm_take_all_locks
mm_drop_all_locks
vma_end_write_all [drops VMA lock taken on VMA A before]
vma_start_write [on VMA B]
vma_mark_detached [on VMA B]
[end first for_each_vma_range loop]
vma_iter_clear_gfp [removes VMAs from maple tree]
mmap_write_downgrade
unmap_region
mmap_read_unlock
In this hypothetical scenario, while do_vmi_align_munmap() thinks it still
holds a VMA write lock on VMA A, the VMA write lock has actually been
invalidated inside __split_vma().
The call from sgx_encl_mm_add() to __mmu_notifier_register() can't
actually happen here, as far as I understand, because we are duplicating
an existing SGX VMA, but sgx_encl_mm_add() only calls
__mmu_notifier_register() for the first SGX VMA created in a given
process. So this could only happen in fork(), not on munmap(). But in my
view it is just pure luck that this can't happen.
Also, we wouldn't actually have any bad consequences from this in
do_vmi_align_munmap(), because by the time the bug drops the lock on VMA
A, we've already marked VMA A as detached, which makes it completely
ineligible for any VMA-locked page faults. But again, that's just pure
luck.
So remove the vma_end_write_all(), so that VMA write locks are only ever
released on mmap_write_unlock() or mmap_write_downgrade().
Also add comments to document the locking rules established by this patch.
Link: https://lkml.kernel.org/r/20230720193436.454247-1-jannh@google.com
Fixes: eeff9a5d47 ("mm/mmap: prevent pagefault handler from racing with mmu_notifier registration")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm->mm_lock_seq effectively functions as a read/write lock; therefore it
must be used with acquire/release semantics.
A specific example is the interaction between userfaultfd_register() and
lock_vma_under_rcu().
userfaultfd_register() does the following from the point where it changes
a VMA's flags to the point where concurrent readers are permitted again
(in a simple scenario where only a single private VMA is accessed and no
merging/splitting is involved):
userfaultfd_register
userfaultfd_set_vm_flags
vm_flags_reset
vma_start_write
down_write(&vma->vm_lock->lock)
vma->vm_lock_seq = mm_lock_seq [marks VMA as busy]
up_write(&vma->vm_lock->lock)
vm_flags_init
[sets VM_UFFD_* in __vm_flags]
vma->vm_userfaultfd_ctx.ctx = ctx
mmap_write_unlock
vma_end_write_all
WRITE_ONCE(mm->mm_lock_seq, mm->mm_lock_seq + 1) [unlocks VMA]
There are no memory barriers in between the __vm_flags update and the
mm->mm_lock_seq update that unlocks the VMA, so the unlock can be
reordered to above the `vm_flags_init()` call, which means from the
perspective of a concurrent reader, a VMA can be marked as a userfaultfd
VMA while it is not VMA-locked. That's bad, we definitely need a
store-release for the unlock operation.
The non-atomic write to vma->vm_lock_seq in vma_start_write() is mostly
fine because all accesses to vma->vm_lock_seq that matter are always
protected by the VMA lock. There is a racy read in vma_start_read()
though that can tolerate false-positives, so we should be using
WRITE_ONCE() to keep things tidy and data-race-free (including for KCSAN).
On the other side, lock_vma_under_rcu() works as follows in the relevant
region for locking and userfaultfd check:
lock_vma_under_rcu
vma_start_read
vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [early bailout]
down_read_trylock(&vma->vm_lock->lock)
vma->vm_lock_seq == READ_ONCE(vma->vm_mm->mm_lock_seq) [main check]
userfaultfd_armed
checks vma->vm_flags & __VM_UFFD_FLAGS
Here, the interesting aspect is how far down the mm->mm_lock_seq read can
be reordered - if this read is reordered down below the vma->vm_flags
access, this could cause lock_vma_under_rcu() to partly operate on
information that was read while the VMA was supposed to be locked. To
prevent this kind of downwards bleeding of the mm->mm_lock_seq read, we
need to read it with a load-acquire.
Some of the comment wording is based on suggestions by Suren.
BACKPORT WARNING: One of the functions changed by this patch (which I've
written against Linus' tree) is vma_try_start_write(), but this function
no longer exists in mm/mm-everything. I don't know whether the merged
version of this patch will be ordered before or after the patch that
removes vma_try_start_write(). If you're backporting this patch to a tree
with vma_try_start_write(), make sure this patch changes that function.
Link: https://lkml.kernel.org/r/20230721225107.942336-1-jannh@google.com
Fixes: 5e31275cc9 ("mm: add per-VMA lock and helper functions to control it")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While our user stacks can grow either down (all common architectures) or
up (parisc and the ia64 register stack), the initial stack setup when we
copy the argument and environment strings to the new stack at execve()
time is always done by extending the stack downwards.
But it turns out that in commit 8d7071af89 ("mm: always expand the
stack with the mmap write lock held"), as part of making the stack
growing code more robust, 'expand_downwards()' was now made to actually
check the vma flags:
if (!(vma->vm_flags & VM_GROWSDOWN))
return -EFAULT;
and that meant that this execve-time stack expansion started failing on
parisc, because on that architecture, the stack flags do not contain the
VM_GROWSDOWN bit.
At the same time the new check in expand_downwards() is clearly correct,
and simplified the callers, so let's not remove it.
The solution is instead to just codify the fact that yes, during
execve(), the stack grows down. This not only matches reality, it ends
up being particularly simple: we already have special execve-time flags
for the stack (VM_STACK_INCOMPLETE_SETUP) and use those flags to avoid
page migration during this setup time (see vma_is_temporary_stack() and
invalid_migration_vma()).
So just add VM_GROWSDOWN to that set of temporary flags, and now our
stack flags automatically match reality, and the parisc stack expansion
works again.
Note that the VM_STACK_INCOMPLETE_SETUP bits will be cleared when the
stack is finalized, so we only add the extra VM_GROWSDOWN bit on
CONFIG_STACK_GROWSUP architectures (ie parisc) rather than adding it in
general.
Link: https://lore.kernel.org/all/612eaa53-6904-6e16-67fc-394f4faa0e16@bell.net/
Link: https://lore.kernel.org/all/5fd98a09-4792-1433-752d-029ae3545168@gmx.de/
Fixes: 8d7071af89 ("mm: always expand the stack with the mmap write lock held")
Reported-by: John David Anglin <dave.anglin@bell.net>
Reported-and-tested-by: Helge Deller <deller@gmx.de>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull nvdimm and DAX updates from Vishal Verma:
"This is mostly small cleanups and fixes, with the biggest change being
the change to the DAX fault handler allowing it to return
VM_FAULT_HWPOISON.
Summary:
- DAX fixes and cleanups including a use after free, extra
references, and device unregistration, and a redundant variable.
- Allow the DAX fault handler to return VM_FAULT_HWPOISON
- A few libnvdimm cleanups such as making some functions and
variables static where sufficient.
- Add a few missing prototypes for wrapped functions in
tools/testing/nvdimm"
* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: enable dax fault handler to report VM_FAULT_HWPOISON
nvdimm: make security_show static
nvdimm: make nd_class variable static
dax/kmem: Pass valid argument to memory_group_register_static
fsdax: remove redundant variable 'error'
dax: Cleanup extra dax_region references
dax: Introduce alloc_dev_dax_id()
dax: Use device_unregister() in unregister_dax_mapping()
dax: Fix dax_mapping_release() use after free
tools/testing/nvdimm: Drop empty platform remove function
libnvdimm: mark 'security_show' static again
testing: nvdimm: add missing prototypes for wrapped functions
dax: fix missing-prototype warnings
Since do_vmi_align_munmap() will always honor the downgrade request on
the success, the callers no longer have to deal with confusing return
codes. Since all callers that request downgrade actually want the lock
to be dropped, change the downgrade to an unlock request.
Note that the lock still needs to be held in read mode during the page
table clean up to avoid races with a map request.
Update do_vmi_align_munmap() to return 0 for success. Clean up the
callers and comments to always expect the unlock to be honored on the
success path. The error path will always leave the lock untouched.
As part of the cleanup, the wrapper function do_vmi_munmap() and callers
to the wrapper are also updated.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:
config PFAULT
bool "Handle protection faults" if EXPERT && !MMU
default y
help
Handle protection faults. MMU configurations must enable it.
noMMU configurations may disable it if used memory map never
generates protection faults or faults are always fatal.
If unsure, say Y.
which completely violated my expectations of the page fault handling.
End result: Guenter reports that the xtensa no-MMU builds all fail with
arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’
because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.
Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a050ba1e74 ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <lrh2000@pku.edu.cn>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
Pull non-mm updates from Andrew Morton:
- Arnd Bergmann has fixed a bunch of -Wmissing-prototypes in top-level
directories
- Douglas Anderson has added a new "buddy" mode to the hardlockup
detector. It permits the detector to work on architectures which
cannot provide the required interrupts, by having CPUs periodically
perform checks on other CPUs
- Zhen Lei has enhanced kexec's ability to support two crash regions
- Petr Mladek has done a lot of cleanup on the hard lockup detector's
Kconfig entries
- And the usual bunch of singleton patches in various places
* tag 'mm-nonmm-stable-2023-06-24-19-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (72 commits)
kernel/time/posix-stubs.c: remove duplicated include
ocfs2: remove redundant assignment to variable bit_off
watchdog/hardlockup: fix typo in config HARDLOCKUP_DETECTOR_PREFER_BUDDY
powerpc: move arch_trigger_cpumask_backtrace from nmi.h to irq.h
devres: show which resource was invalid in __devm_ioremap_resource()
watchdog/hardlockup: define HARDLOCKUP_DETECTOR_ARCH
watchdog/sparc64: define HARDLOCKUP_DETECTOR_SPARC64
watchdog/hardlockup: make HAVE_NMI_WATCHDOG sparc64-specific
watchdog/hardlockup: declare arch_touch_nmi_watchdog() only in linux/nmi.h
watchdog/hardlockup: make the config checks more straightforward
watchdog/hardlockup: sort hardlockup detector related config values a logical way
watchdog/hardlockup: move SMP barriers from common code to buddy code
watchdog/buddy: simplify the dependency for HARDLOCKUP_DETECTOR_PREFER_BUDDY
watchdog/buddy: don't copy the cpumask in watchdog_next_cpu()
watchdog/buddy: cleanup how watchdog_buddy_check_hardlockup() is called
watchdog/hardlockup: remove softlockup comment in touch_nmi_watchdog()
watchdog/hardlockup: in watchdog_hardlockup_check() use cpumask_copy()
watchdog/hardlockup: don't use raw_cpu_ptr() in watchdog_hardlockup_kick()
watchdog/hardlockup: HAVE_NMI_WATCHDOG must implement watchdog_hardlockup_probe()
watchdog/hardlockup: keep kernel.nmi_watchdog sysctl as 0444 if probe fails
...
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
This finishes the job of always holding the mmap write lock when
extending the user stack vma, and removes the 'write_locked' argument
from the vm helper functions again.
For some cases, we just avoid expanding the stack at all: drivers and
page pinning really shouldn't be extending any stacks. Let's see if any
strange users really wanted that.
It's worth noting that architectures that weren't converted to the new
lock_mm_and_find_vma() helper function are left using the legacy
"expand_stack()" function, but it has been changed to drop the mmap_lock
and take it for writing while expanding the vma. This makes it fairly
straightforward to convert the remaining architectures.
As a result of dropping and re-taking the lock, the calling conventions
for this function have also changed, since the old vma may no longer be
valid. So it will now return the new vma if successful, and NULL - and
the lock dropped - if the area could not be extended.
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> # ia64
Tested-by: Frank Scheiner <frank.scheiner@web.de> # ia64
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 confidential computing update from Borislav Petkov:
- Add support for unaccepted memory as specified in the UEFI spec v2.9.
The gist of it all is that Intel TDX and AMD SEV-SNP confidential
computing guests define the notion of accepting memory before using
it and thus preventing a whole set of attacks against such guests
like memory replay and the like.
There are a couple of strategies of how memory should be accepted -
the current implementation does an on-demand way of accepting.
* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: sevguest: Add CONFIG_CRYPTO dependency
x86/efi: Safely enable unaccepted memory in UEFI
x86/sev: Add SNP-specific unaccepted memory support
x86/sev: Use large PSC requests if applicable
x86/sev: Allow for use of the early boot GHCB for PSC requests
x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
x86/sev: Fix calculation of end address based on number of pages
x86/tdx: Add unaccepted memory support
x86/tdx: Refactor try_accept_one()
x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
efi: Add unaccepted memory support
x86/boot/compressed: Handle unaccepted memory
efi/libstub: Implement support for unaccepted memory
efi/x86: Get full memory map in allocate_e820()
mm: Add support for unaccepted memory
When multiple processes mmap() a dax file, then at some point,
a process issues a 'load' and consumes a hwpoison, the process
receives a SIGBUS with si_code = BUS_MCEERR_AR and with si_lsb
set for the poison scope. Soon after, any other process issues
a 'load' to the poisoned page (that is unmapped from the kernel
side by memory_failure), it receives a SIGBUS with
si_code = BUS_ADRERR and without valid si_lsb.
This is confusing to user, and is different from page fault due
to poison in RAM memory, also some helpful information is lost.
Channel dax backend driver's poison detection to the filesystem
such that instead of reporting VM_FAULT_SIGBUS, it could report
VM_FAULT_HWPOISON.
If user level block IO syscalls fail due to poison, the errno will
be converted to EIO to maintain block API consistency.
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Link: https://lore.kernel.org/r/20230615181325.1327259-2-jane.chu@oracle.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Make calls to extend_vma() and find_extend_vma() fail if the write lock
is required.
To avoid making this a flag-day event, this still allows the old
read-locking case for the trivial situations, and passes in a flag to
say "is it write-locked". That way write-lockers can say "yes, I'm
being careful", and legacy users will continue to work in all the common
cases until they have been fully converted to the new world order.
Co-Developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.. and make x86 use it.
This basically extracts the existing x86 "find and expand faulting vma"
code, but extends it to also take the mmap lock for writing in case we
actually do need to expand the vma.
We've historically short-circuited that case, and have some rather ugly
special logic to serialize the stack segment expansion (since we only
hold the mmap lock for reading) that doesn't match the normal VM
locking.
That slight violation of locking worked well, right up until it didn't:
the maple tree code really does want proper locking even for simple
extension of an existing vma.
So extract the code for "look up the vma of the fault" from x86, fix it
up to do the necessary write locking, and make it available as a helper
function for other architectures that can use the common helper.
Note: I say "common helper", but it really only handles the normal
stack-grows-down case. Which is all architectures except for PA-RISC
and IA64. So some rare architectures can't use the helper, but if they
care they'll just need to open-code this logic.
It's also worth pointing out that this code really would like to have an
optimistic "mmap_upgrade_trylock()" to make it quicker to go from a
read-lock (for the common case) to taking the write lock (for having to
extend the vma) in the normal single-threaded situation where there is
no other locking activity.
But that _is_ all the very uncommon special case, so while it would be
nice to have such an operation, it probably doesn't matter in reality.
I did put in the skeleton code for such a possible future expansion,
even if it only acts as pseudo-documentation for what we're doing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
early_pfn_to_nid() is called frequently in init_reserved_page(), it
returns the node id of the PFN. These PFN are probably from the same
memory region, they have the same node id. It's not necessary to call
early_pfn_to_nid() for each PFN.
Pass nid to reserve_bootmem_region() and drop the call to
early_pfn_to_nid() in init_reserved_page(). Also, set nid on all reserved
pages before doing this, as some reserved memory regions may not be set
nid.
The most beneficial function is memmap_init_reserved_pages() if
CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled.
The following data was tested on an x86 machine with 190GB of RAM.
before:
memmap_init_reserved_pages() 67ms
after:
memmap_init_reserved_pages() 20ms
Link: https://lkml.kernel.org/r/20230619023406.424298-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
