Current code enables PPR and GA interrupts before setting up the
interrupt handler (in state_next()). Make sure interrupt handler
is in place before enabling these interrupt.
amd_iommu_enable_interrupts() gets called in normal boot, kdump as well
as in suspend/resume path. Hence moving interrupt enablement to this
function works fine.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230628054554.6131-4-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Move PPR log interrupt bit setting to iommu_enable_ppr_log(). Also
rearrange iommu_enable_ppr_log() such that PPREn bit is enabled
before enabling PPRLog and PPRInt bits. So that when PPRLog bit is
set it will clear the PPRLogOverflow bit and sets the PPRLogRun bit
in the IOMMU Status Register [MMIO Offset 2020h].
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230628054554.6131-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
AMD IOMMU has three log buffers (i.e. Event, PPR, and GA). These logs can
be configured to generate different interrupts when an entry is inserted
into a log buffer.
However, current implementation share single interrupt to handle all three
logs. With increasing usages of the GA (for IOMMU AVIC) and PPR logs (for
IOMMUv2 APIs and SVA), interrupt sharing could potentially become
performance bottleneck.
Hence, separate IOMMU interrupt into use three separate vectors and irq
threads with corresponding name, which will be displayed in the
/proc/interrupts as "AMD-Vi<x>-[Evt/PPR/GA]", where "x" is an IOMMU id.
Note that this patch changes interrupt handling only in IOMMU x2apic mode
(MMIO 0x18[IntCapXTEn]=1). In legacy mode it will continue to use single
MSI interrupt.
Signed-off-by: Vasant Hegde<vasant.hegde@amd.com>
Reviewed-by: Alexey Kardashevskiy<aik@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230628053222.5962-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some ATS-capable peripherals can issue requests to the processor to service
peripheral page requests using PCIe PRI (the Page Request Interface). IOMMU
supports PRI using PPR log buffer. IOMMU writes PRI request to PPR log
buffer and sends PPR interrupt to host. When there is no space in the
PPR log buffer (PPR log overflow) it will set PprOverflow bit in 'MMIO
Offset 2020h IOMMU Status Register'. When this happens PPR log needs to be
restarted as specified in IOMMU spec [1] section 2.6.2.
When handling the event it just resumes the PPR log without resizing
(similar to the way event and GA log overflow is handled).
Failing to handle PPR overflow means device may not work properly as
IOMMU stops processing new PPR events from device.
[1] https://www.amd.com/system/files/TechDocs/48882_3.07_PUB.pdf
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-3-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Each IOMMU has three log buffers (Event, GA and PPR log). Once a buffer
becomes full, IOMMU generates an interrupt with the corresponding overflow
status bit, and stop processing the log. To handle an overflow, the IOMMU
driver needs to disable the log, clear the overflow status bit, and
re-enable the log. This procedure is same among all types of log
buffer except it uses different overflow status bit and enabling bit.
Hence, to consolidate the log buffer restarting logic, introduce a helper
function amd_iommu_restart_log(), which caller can specify parameters
specific for each type of log buffer.
Also rename MMIO_STATUS_EVT_OVERFLOW_INT_MASK as
MMIO_STATUS_EVT_OVERFLOW_MASK.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230628051624.5792-2-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Invalidating Interrupt Remapping Table (IRT) requires, the AMD IOMMU driver
to issue INVALIDATE_INTERRUPT_TABLE and COMPLETION_WAIT commands.
Currently, the driver issues the two commands separately, which requires
calling raw_spin_lock_irqsave() twice. In addition, the COMPLETION_WAIT
could potentially be interleaved with other commands causing delay of
the COMPLETION_WAIT command.
Therefore, combine issuing of the two commands in one spin-lock, and
changing struct amd_iommu.cmd_sem_val to use atomic64 to minimize
locking.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-6-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
An Interrupt Remapping Table (IRT) stores interrupt remapping configuration
for each device. In a normal operation, the AMD IOMMU caches the table
to optimize subsequent data accesses. This requires the IOMMU driver to
invalidate IRT whenever it updates the table. The invalidation process
includes issuing an INVALIDATE_INTERRUPT_TABLE command following by
a COMPLETION_WAIT command.
However, there are cases in which the IRT is updated at a high rate.
For example, for IOMMU AVIC, the IRTE[IsRun] bit is updated on every
vcpu scheduling (i.e. amd_iommu_update_ga()). On system with large
amount of vcpus and VFIO PCI pass-through devices, the invalidation
process could potentially become a performance bottleneck.
Introducing a new kernel boot option:
amd_iommu=irtcachedis
which disables IRTE caching by setting the IRTCachedis bit in each IOMMU
Control register, and bypass the IRT invalidation process.
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Co-developed-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20230530141137.14376-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
GALog exists to propagate interrupts into all vCPUs in the system when
interrupts are marked as non running (e.g. when vCPUs aren't running). A
GALog overflow happens when there's in no space in the log to record the
GATag of the interrupt. So when the GALOverflow condition happens, the
GALog queue is processed and the GALog is restarted, as the IOMMU
manual indicates in section "2.7.4 Guest Virtual APIC Log Restart
Procedure":
| * Wait until MMIO Offset 2020h[GALogRun]=0b so that all request
| entries are completed as circumstances allow. GALogRun must be 0b to
| modify the guest virtual APIC log registers safely.
| * Write MMIO Offset 0018h[GALogEn]=0b.
| * As necessary, change the following values (e.g., to relocate or
| resize the guest virtual APIC event log):
| - the Guest Virtual APIC Log Base Address Register
| [MMIO Offset 00E0h],
| - the Guest Virtual APIC Log Head Pointer Register
| [MMIO Offset 2040h][GALogHead], and
| - the Guest Virtual APIC Log Tail Pointer Register
| [MMIO Offset 2048h][GALogTail].
| * Write MMIO Offset 2020h[GALOverflow] = 1b to clear the bit (W1C).
| * Write MMIO Offset 0018h[GALogEn] = 1b, and either set
| MMIO Offset 0018h[GAIntEn] to enable the GA log interrupt or clear
| the bit to disable it.
Failing to handle the GALog overflow means that none of the VFs (in any
guest) will work with IOMMU AVIC forcing the user to power cycle the
host. When handling the event it resumes the GALog without resizing
much like how it is done in the event handler overflow. The
[MMIO Offset 2020h][GALOverflow] bit might be set in status register
without the [MMIO Offset 2020h][GAInt] bit, so when deciding to poll
for GA events (to clear space in the galog), also check the overflow
bit.
[suravee: Check for GAOverflow without GAInt, toggle CONTROL_GAINT_EN]
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230419201154.83880-3-joao.m.martins@oracle.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A recent commit introduced these compile warnings:
CC drivers/iommu/amd/init.o
drivers/iommu/amd/init.c:938:12: error: ‘iommu_init_ga_log’ defined but not used [-Werror=unused-function]
938 | static int iommu_init_ga_log(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~
drivers/iommu/amd/init.c:902:12: error: ‘iommu_ga_log_enable’ defined but not used [-Werror=unused-function]
902 | static int iommu_ga_log_enable(struct amd_iommu *iommu)
| ^~~~~~~~~~~~~~~~~~~
The warnings appear because both functions are defined when IRQ
remapping is not enabled, but only used when IRQ remapping is enabled.
Fix it by only defining the functions when IRQ remapping is enabled.
Fixes: c5e1a1eb92 ("iommu/amd: Simplify and Consolidate Virtual APIC (AVIC) Enablement")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20220729100432.22474-1-joro@8bytes.org
On AMD system with SNP enabled, IOMMU hardware checks the host translation
valid (TV) and guest translation valid (GV) bits in the device table entry
(DTE) before accessing the corresponded page tables.
However, current IOMMU driver sets the TV bit for all devices regardless
of whether the host page table is in use. This results in
ILLEGAL_DEV_TABLE_ENTRY event for devices, which do not the host page
table root pointer set up.
Thefore, when SNP is enabled, only set TV bit when DMA remapping is not
used, which is when domain ID in the AMD IOMMU device table entry (DTE)
is zero.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-8-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
To support SNP, IOMMU needs to be enabled, and prohibits IOMMU
configurations where DTE[Mode]=0, which means it cannot be supported with
IOMMU passthrough domain (a.k.a IOMMU_DOMAIN_IDENTITY),
and when AMD IOMMU driver is configured to not use the IOMMU host (v1) page
table. Otherwise, RMP table initialization could cause the system to crash.
The request to enable SNP support in IOMMU must be done before PCI
initialization state of the IOMMU driver because enabling SNP affects
how IOMMU driver sets up IOMMU data structures (i.e. DTE).
Unlike other IOMMU features, SNP feature does not have an enable bit in
the IOMMU control register. Instead, the IOMMU driver introduces
an amd_iommu_snp_en variable to track enabling state of SNP.
Introduce amd_iommu_snp_enable() for other drivers to request enabling
the SNP support in IOMMU, which checks all prerequisites and determines
if the feature can be safely enabled.
Please see the IOMMU spec section 2.12 for further details.
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-7-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The ACPI IVRS table can contain multiple IVHD blocks. Each block contains
information used to initialize each IOMMU instance.
Currently, init_iommu_all sequentially process IVHD block and initialize
IOMMU instance one-by-one. However, certain features require all IOMMUs
to be configured in the same way system-wide. In case certain IVHD blocks
contain inconsistent information (most likely FW bugs), the driver needs
to go through and try to revert settings on IOMMUs that have already been
configured.
A solution is to split IOMMU initialization into 3 phases:
Phase1 : Processes information of the IVRS table for all IOMMU instances.
This allow all IVHDs to be processed prior to enabling features.
Phase2 : Early feature support check on all IOMMUs (using information in
IVHD blocks.
Phase3 : Iterates through all IOMMU instances and enabling features.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-5-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Some IOMMU features require that all IOMMUs must support the feature,
which is determined by checking the support bit in the Extended Feature
Register 1 and 2 (EFR/EFR2) on all IOMMUs. This check is done by the
function check_feature_on_all_iommus(), which iterates through all
IOMMUs everytime it is called.
Instead, introduce a global variable to store common EFR/EFR2 among all
IOMMUs. In case of inconsistent EFR/EFR2 masks are detected on an IOMMU,
a FW_BUG warning is reported.
Suggested-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/20220713225651.20758-4-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Current code uses global "amd_iommu_last_bdf" to track the last bdf
supported by the system. This value is used for various memory
allocation, device data flushing, etc.
Introduce per PCI segment last_bdf which will be used to track last bdf
supported by the given PCI segment and use this value for all per
segment memory allocations. Eventually it will replace global
"amd_iommu_last_bdf".
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-11-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Newer AMD systems can support multiple PCI segments. In order to support
multiple PCI segments IVMD table in IVRS structure is enhanced to
include pci segment id. Update ivmd_header structure to include "pci_seg".
Also introduce per PCI segment unity map list. It will replace global
amd_iommu_unity_map list.
Note that we have used "reserved" field in IVMD table to include "pci_seg
id" which was set to zero. It will take care of backward compatibility
(new kernel will work fine on older systems).
Co-developed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20220706113825.25582-10-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
