Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:

 - a small collection of remaining API conversion patches (all acked)
   which allow to finally remove the deprecated API

 - some documentation fixes and a MAINTAINERS addition

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
  i2c: smbus: Fix spelling mistake in the comments
  Documentation/i2c: SMBus start signal is S not A
  i2c: remove deprecated i2c_new_device API
  Documentation: media: convert to use i2c_new_client_device()
  video: backlight: tosa_lcd: convert to use i2c_new_client_device()
  x86/platform/intel-mid: convert to use i2c_new_client_device()
  drm: encoder_slave: use new I2C API
  drm: encoder_slave: fix refcouting error for modules

Documentation/driver-api/media/v4l2-subdev.rst

@@ -451,7 +451,7 @@ The bridge driver also has some helper functions it can use:
 					"module_foo", "chipid", 0x36, NULL);
 
 This loads the given module (can be ``NULL`` if no module needs to be loaded)
-and calls :c:func:`i2c_new_device` with the given ``i2c_adapter`` and
+and calls :c:func:`i2c_new_client_device` with the given ``i2c_adapter`` and
 chip/address arguments. If all goes well, then it registers the subdev with
 the v4l2_device.
 

Documentation/i2c/smbus-protocol.rst

@@ -57,7 +57,7 @@ SMBus Quick Command
 
 This sends a single bit to the device, at the place of the Rd/Wr bit::
 
-  A Addr Rd/Wr [A] P
+  S Addr Rd/Wr [A] P
 
 Functionality flag: I2C_FUNC_SMBUS_QUICK
 

Documentation/userspace-api/media/conf_nitpick.py

@@ -27,7 +27,7 @@ nitpick_ignore = [
     ("c:func", "copy_to_user"),
     ("c:func", "determine_valid_ioctls"),
     ("c:func", "ERR_PTR"),
-    ("c:func", "i2c_new_device"),
+    ("c:func", "i2c_new_client_device"),
     ("c:func", "ioctl"),
     ("c:func", "IS_ERR"),
     ("c:func", "KERNEL_VERSION"),

MAINTAINERS

@@ -14196,6 +14196,15 @@ L:	dmaengine@vger.kernel.org
 S:	Supported
 F:	drivers/dma/qcom/hidma*
 
+QUALCOMM I2C CCI DRIVER
+M:	Loic Poulain <loic.poulain@linaro.org>
+M:	Robert Foss <robert.foss@linaro.org>
+L:	linux-i2c@vger.kernel.org
+L:	linux-arm-msm@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
+F:	drivers/i2c/busses/i2c-qcom-cci.c
+
 QUALCOMM IOMMU
 M:	Rob Clark <robdclark@gmail.com>
 L:	iommu@lists.linux-foundation.org

arch/x86/platform/intel-mid/sfi.c

@@ -287,8 +287,8 @@ void intel_scu_devices_create(void)
 
 		adapter = i2c_get_adapter(i2c_bus[i]);
 		if (adapter) {
-			client = i2c_new_device(adapter, i2c_devs[i]);
+			client = i2c_new_client_device(adapter, i2c_devs[i]);
-			if (!client)
+			if (IS_ERR(client))
 				pr_err("can't create i2c device %s\n",
 					i2c_devs[i]->type);
 		} else

drivers/gpu/drm/drm_encoder_slave.c

@@ -61,13 +61,8 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 
 	request_module("%s%s", I2C_MODULE_PREFIX, info->type);
 
-	client = i2c_new_device(adap, info);
+	client = i2c_new_client_device(adap, info);
-	if (!client) {
+	if (!i2c_client_has_driver(client)) {
-		err = -ENOMEM;
-		goto fail;
-	}
-
-	if (!client->dev.driver) {
 		err = -ENODEV;
 		goto fail_unregister;
 	}
@@ -84,7 +79,7 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 
 	err = encoder_drv->encoder_init(client, dev, encoder);
 	if (err)
-		goto fail_unregister;
+		goto fail_module_put;
 
 	if (info->platform_data)
 		encoder->slave_funcs->set_config(&encoder->base,
@@ -92,10 +87,10 @@ int drm_i2c_encoder_init(struct drm_device *dev,
 
 	return 0;
 
+fail_module_put:
+	module_put(module);
 fail_unregister:
 	i2c_unregister_device(client);
-	module_put(module);
-fail:
 	return err;
 }
 EXPORT_SYMBOL(drm_i2c_encoder_init);

drivers/i2c/i2c-core-base.c

@@ -815,31 +815,6 @@ out_err_silent:
 }
 EXPORT_SYMBOL_GPL(i2c_new_client_device);
 
-/**
- * i2c_new_device - instantiate an i2c device
- * @adap: the adapter managing the device
- * @info: describes one I2C device; bus_num is ignored
- * Context: can sleep
- *
- * This deprecated function has the same functionality as
- * @i2c_new_client_device, it just returns NULL instead of an ERR_PTR in case of
- * an error for compatibility with current I2C API. It will be removed once all
- * users are converted.
- *
- * This returns the new i2c client, which may be saved for later use with
- * i2c_unregister_device(); or NULL to indicate an error.
- */
-struct i2c_client *
-i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
-{
-	struct i2c_client *ret;
-
-	ret = i2c_new_client_device(adap, info);
-	return IS_ERR(ret) ? NULL : ret;
-}
-EXPORT_SYMBOL_GPL(i2c_new_device);
-
-
 /**
  * i2c_unregister_device - reverse effect of i2c_new_*_device()
  * @client: value returned from i2c_new_*_device()

drivers/i2c/i2c-core-smbus.c

@@ -4,7 +4,7 @@
  *
  * This file contains the SMBus functions which are always included in the I2C
  * core because they can be emulated via I2C. SMBus specific extensions
- * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ * (e.g. smbalert) are handled in a separate i2c-smbus module.
  *
  * All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
  * SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and

drivers/video/backlight/tosa_lcd.c

@@ -107,7 +107,7 @@ static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
 	/* TG LCD GVSS */
 	tosa_tg_send(spi, TG_PINICTL, 0x0);
 
-	if (!data->i2c) {
+	if (IS_ERR_OR_NULL(data->i2c)) {
 		/*
 		 * after the pannel is powered up the first time,
 		 * we can access the i2c bus so probe for the DAC
@@ -119,7 +119,7 @@ static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
 			.addr	= DAC_BASE,
 			.platform_data = data->spi,
 		};
-		data->i2c = i2c_new_device(adap, &info);
+		data->i2c = i2c_new_client_device(adap, &info);
 	}
 }
 

include/linux/i2c.h

@@ -408,7 +408,7 @@ static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
  * that are present.  This information is used to grow the driver model tree.
  * For mainboards this is done statically using i2c_register_board_info();
  * bus numbers identify adapters that aren't yet available.  For add-on boards,
- * i2c_new_device() does this dynamically with the adapter already known.
+ * i2c_new_client_device() does this dynamically with the adapter already known.
  */
 struct i2c_board_info {
 	char		type[I2C_NAME_SIZE];
@@ -439,13 +439,11 @@ struct i2c_board_info {
 
 
 #if IS_ENABLED(CONFIG_I2C)
-/* Add-on boards should register/unregister their devices; e.g. a board
+/*
+ * Add-on boards should register/unregister their devices; e.g. a board
  * with integrated I2C, a config eeprom, sensors, and a codec that's
  * used in conjunction with the primary hardware.
  */
-struct i2c_client *
-i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info);
-
 struct i2c_client *
 i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *info);