Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of driver core changes for 5.19-rc1.

  Lots of tiny driver core changes and cleanups happened this cycle, but
  the two major things are:

   - firmware_loader reorganization and additions including the ability
     to have XZ compressed firmware images and the ability for userspace
     to initiate the firmware load when it needs to, instead of being
     always initiated by the kernel. FPGA devices specifically want this
     ability to have their firmware changed over the lifetime of the
     system boot, and this allows them to work without having to come up
     with yet-another-custom-uapi interface for loading firmware for
     them.

   - physical location support added to sysfs so that devices that know
     this information, can tell userspace where they are located in a
     common way. Some ACPI devices already support this today, and more
     bus types should support this in the future.

  Smaller changes include:

   - driver_override api cleanups and fixes

   - error path cleanups and fixes

   - get_abi script fixes

   - deferred probe timeout changes.

  It's that last change that I'm the most worried about. It has been
  reported to cause boot problems for a number of systems, and I have a
  tested patch series that resolves this issue. But I didn't get it
  merged into my tree before 5.18-final came out, so it has not gotten
  any linux-next testing.

  I'll send the fixup patches (there are 2) as a follow-on series to this
  pull request.

  All have been tested in linux-next for weeks, with no reported issues
  other than the above-mentioned boot time-outs"

* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
  driver core: fix deadlock in __device_attach
  kernfs: Separate kernfs_pr_cont_buf and rename_lock.
  topology: Remove unused cpu_cluster_mask()
  driver core: Extend deferred probe timeout on driver registration
  MAINTAINERS: add Russ Weight as a firmware loader maintainer
  driver: base: fix UAF when driver_attach failed
  test_firmware: fix end of loop test in upload_read_show()
  driver core: location: Add "back" as a possible output for panel
  driver core: location: Free struct acpi_pld_info *pld
  driver core: Add "*" wildcard support to driver_async_probe cmdline param
  driver core: location: Check for allocations failure
  arch_topology: Trace the update thermal pressure
  kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
  export: fix string handling of namespace in EXPORT_SYMBOL_NS
  rpmsg: use local 'dev' variable
  rpmsg: Fix calling device_lock() on non-initialized device
  firmware_loader: describe 'module' parameter of firmware_upload_register()
  firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
  firmware_loader: Fix configs for sysfs split
  selftests: firmware: Add firmware upload selftests
  ...

include/linux/device.h

@@ -386,6 +386,75 @@ struct dev_msi_info {
 #endif
 };
 
+/**
+ * enum device_physical_location_panel - Describes which panel surface of the
+ * system's housing the device connection point resides on.
+ * @DEVICE_PANEL_TOP: Device connection point is on the top panel.
+ * @DEVICE_PANEL_BOTTOM: Device connection point is on the bottom panel.
+ * @DEVICE_PANEL_LEFT: Device connection point is on the left panel.
+ * @DEVICE_PANEL_RIGHT: Device connection point is on the right panel.
+ * @DEVICE_PANEL_FRONT: Device connection point is on the front panel.
+ * @DEVICE_PANEL_BACK: Device connection point is on the back panel.
+ * @DEVICE_PANEL_UNKNOWN: The panel with device connection point is unknown.
+ */
+enum device_physical_location_panel {
+	DEVICE_PANEL_TOP,
+	DEVICE_PANEL_BOTTOM,
+	DEVICE_PANEL_LEFT,
+	DEVICE_PANEL_RIGHT,
+	DEVICE_PANEL_FRONT,
+	DEVICE_PANEL_BACK,
+	DEVICE_PANEL_UNKNOWN,
+};
+
+/**
+ * enum device_physical_location_vertical_position - Describes vertical
+ * position of the device connection point on the panel surface.
+ * @DEVICE_VERT_POS_UPPER: Device connection point is at upper part of panel.
+ * @DEVICE_VERT_POS_CENTER: Device connection point is at center part of panel.
+ * @DEVICE_VERT_POS_LOWER: Device connection point is at lower part of panel.
+ */
+enum device_physical_location_vertical_position {
+	DEVICE_VERT_POS_UPPER,
+	DEVICE_VERT_POS_CENTER,
+	DEVICE_VERT_POS_LOWER,
+};
+
+/**
+ * enum device_physical_location_horizontal_position - Describes horizontal
+ * position of the device connection point on the panel surface.
+ * @DEVICE_HORI_POS_LEFT: Device connection point is at left part of panel.
+ * @DEVICE_HORI_POS_CENTER: Device connection point is at center part of panel.
+ * @DEVICE_HORI_POS_RIGHT: Device connection point is at right part of panel.
+ */
+enum device_physical_location_horizontal_position {
+	DEVICE_HORI_POS_LEFT,
+	DEVICE_HORI_POS_CENTER,
+	DEVICE_HORI_POS_RIGHT,
+};
+
+/**
+ * struct device_physical_location - Device data related to physical location
+ * of the device connection point.
+ * @panel: Panel surface of the system's housing that the device connection
+ *         point resides on.
+ * @vertical_position: Vertical position of the device connection point within
+ *                     the panel.
+ * @horizontal_position: Horizontal position of the device connection point
+ *                       within the panel.
+ * @dock: Set if the device connection point resides in a docking station or
+ *        port replicator.
+ * @lid: Set if this device connection point resides on the lid of laptop
+ *       system.
+ */
+struct device_physical_location {
+	enum device_physical_location_panel panel;
+	enum device_physical_location_vertical_position vertical_position;
+	enum device_physical_location_horizontal_position horizontal_position;
+	bool dock;
+	bool lid;
+};
+
 /**
  * struct device - The basic device structure
  * @parent:	The device's "parent" device, the device to which it is attached.
@@ -451,6 +520,8 @@ struct dev_msi_info {
  * 		device (i.e. the bus driver that discovered the device).
  * @iommu_group: IOMMU group the device belongs to.
  * @iommu:	Per device generic IOMMU runtime data
+ * @physical_location: Describes physical location of the device connection
+ *		point in the system housing.
  * @removable:  Whether the device can be removed from the system. This
  *              should be set by the subsystem / bus driver that discovered
  *              the device.
@@ -562,6 +633,8 @@ struct device {
 	struct iommu_group	*iommu_group;
 	struct dev_iommu	*iommu;
 
+	struct device_physical_location *physical_location;
+
 	enum device_removable	removable;
 
 	bool			offline_disabled:1;